{"title":"Dante Bridges","description":"Bring several mics and line sources onto one Dante network in a single PoE-powered box.","products":[{"product_id":"4x4-mic-line-dante-and-aes67-bridge-with-8-band-peq-and-delay","title":"4x4 Mic\/Line Dante® and AES67 Bridge with 8-Band PEQ and Delay","description":"\u003cp\u003e\u003cstrong\u003eBrings four mic or line sources onto Dante® and returns four Dante® channels to analog, tuned and time-aligned at the interface, from one device on one network drop.\u003c\/strong\u003e The AUD-DTE-4X4LINE is a black metal unit measuring 7.87 x 7.09 x 1.73 in. It has two locking RJ45 Dante® ports, primary and secondary, and runs on PoE+ or the supplied 12V\/2.5A locking DC supply, drawing 8.64W at most. Four balanced or unbalanced inputs and four balanced or unbalanced outputs terminate on 3.5mm Phoenix connectors. It is the right choice for meeting rooms, lecture halls, houses of worship and venues where channels per drop and I\/O-level DSP matter more than a stack of 2-channel adapters.\u003c\/p\u003e\u003cp\u003eEach input has switchable +48V phantom power, and a global 0dBFS line-up runs in six steps from -35dBV to +24dBu. One unit therefore handles a condenser mic, consumer playback gear or a hot +24dBu line feed. Every input and output has an 8-band PEQ (±15dB) with parametric, low-pass, high-pass and shelving filters, and each output has up to 50ms of delay. Five preset scenes store every setting except the network settings. The unit carries Dante® and AES67 audio at 44.1kHz to 96kHz, 16\/24-bit. You configure it from the built-in Web GUI or Dante® Controller and control it over TCP\/IP or Telnet. It joins the rest of the KanexPro Dante® range, from amplifiers and wall plates to 2-channel adapters, so one room can be built from one catalogue.\u003c\/p\u003e","brand":"KanexPro","offers":[{"title":"Default Title","offer_id":51567545090287,"sku":"AUD-DTE-4X4LINE","price":749.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/1308\/4143\/files\/AUD-DTE-4X4LINE-zoom1.png?v=1794941531"},{"product_id":"dante-8x8-analog-audio-bridge-with-dsp-phoenix-i-o-poe","title":"Dante 8x8 Analog Audio Bridge with DSP, Phoenix I\/O, PoE+","description":"\u003cp\u003e\u003cstrong\u003ePuts eight analog mics or line sources onto a Dante® network and brings eight Dante® channels back out to analog amplifiers and speakers, all from one rack-mount unit on one switch port.\u003c\/strong\u003e The AUD-DTE-8X8LINE is a 19-inch rack-mount bridge in a black metal enclosure. It has eight balanced or unbalanced mic\/line inputs, each with switchable +48V phantom power, and eight balanced or unbalanced line outputs. All I\/O terminates on 12-pin 3.5mm Phoenix connectors.\u003c\/p\u003e\u003cp\u003eThe primary and secondary Dante® ports run as hot backups, so audio moves to the secondary network automatically if the primary fails. Onboard DSP gives every input and output its own gain and 8-band parametric EQ (+\/-15 dB) and every output up to 50 ms of delay. A selectable 0 dBFS line-up from -35 dBV to +24 dBu matches mic-level, consumer-level and pro-level gear. Setup runs from the built-in Web GUI, which stores five preset scenes, and control systems can use TCP\/IP and Telnet commands. The strongest advantage is consolidation: one managed Dante® device with one PoE+ load replaces a bank of 2-channel endpoints, so there are fewer devices to mount, power, label and patch.\u003c\/p\u003e","brand":"KanexPro","offers":[{"title":"Default Title","offer_id":51567892267247,"sku":"AUD-DTE-8X8LINE","price":899.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/1308\/4143\/files\/AUD-DTE-8X8LINE-zoom1.png?v=1794944393"},{"product_id":"8x8-xlr-to-dante-aes67-audio-bridge-with-48v-phantom-peq-and-delay-1u","title":"8x8 XLR to Dante\/AES67 Audio Bridge with +48V Phantom, PEQ and Delay, 1U","description":"\u003cp\u003e\u003cstrong\u003ePuts eight mic or line sources onto a Dante® network, and brings eight Dante® channels back out to analog XLR, from a single rack unit with no separate preamp or DSP.\u003c\/strong\u003e AUD-DTE-8X8XLR is a 1U, 19-inch metal bridge. It has eight XLR\/TRS combo inputs with switchable +48V phantom power on every channel and eight balanced XLR line outputs.\u003c\/p\u003e\u003cp\u003eEach input offers six sensitivity settings from -35dBV to +24dBu, so wireless receivers, condenser mics, mixers and playback devices connect directly. Each output offers five levels up to +20dBu, so it can feed amplifiers, IEM transmitters and legacy DSPs. On-board DSP provides gain, an 8-band parametric EQ on every input and output, up to 50ms of output delay, and five recallable preset scenes. The unit carries Dante® 8x8 with AES67 at 44.1kHz to 96kHz, 16 or 24 bits, with device latency selectable from 2ms to 10ms. You can set it up in Dante® Controller and the built-in Web GUI, and control systems can drive it over an ASCII API on TCP\/IP or Telnet. One unit does the work of eight 2-channel endpoints.\u003c\/p\u003e","brand":"KanexPro","offers":[{"title":"Default Title","offer_id":51569184112879,"sku":"AUD-DTE-8X8XLR","price":1049.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/1308\/4143\/files\/AUD-DTE-8X8XLR-zoom1.png?v=1794950253"},{"product_id":"16x16-xlr-audio-bridge-with-dante-and-poe-19-rack-mount","title":"16x16 XLR Audio Bridge with Dante® and PoE+, 19\" Rack Mount","description":"\u003cp\u003e\u003cstrong\u003ePuts sixteen microphone or line sources onto a Dante® network and returns sixteen balanced feeds to analog gear, all from one 19\" rack-mount chassis.\u003c\/strong\u003e The AUD-DTE-16X16XLR has 16 XLR\/TRS combo inputs, each with switchable +48V phantom power, and 16 balanced XLR outputs. All 32 channels are bridged to and from Dante® and AES67 through primary and secondary RJ45 ports.\u003c\/p\u003e\u003cp\u003eEach input has six sensitivity settings, from -35dBV for microphones up to +24dBu for hot line-level gear, plus a fine gain trim of +\/-12dB. An 8-band parametric EQ (+\/-15dB) is available on every input and output, each output has delay, and five presets store complete room setups. Routing and latency are set in Dante® Controller, and levels, EQ and presets are set from the built-in Web GUI or by ASCII commands over TCP\/IP or Telnet. If the primary network fails, the secondary port takes over automatically. The strongest reason to choose it is consolidation: one chassis does the work of separate 16-channel input and output units, or of sixteen 2-channel endpoints, at the head end.\u003c\/p\u003e","brand":"KanexPro","offers":[{"title":"Default Title","offer_id":51569191092463,"sku":"AUD-DTE-16X16XLR","price":1549.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/1308\/4143\/files\/AUD-DTE-16X16XLR-zoom1.png?v=1794950415"},{"product_id":"2x2-xlr-dante-audio-bridge-with-dsp-8-band-peq-and-delay","title":"2x2 XLR Dante Audio Bridge with DSP, 8-Band PEQ and Delay","description":"\u003cp\u003e\u003cstrong\u003ePuts two analog XLR sources onto a Dante® network and sends two Dante® feeds back out to analog XLR, all from one box at the equipment location.\u003c\/strong\u003e The AUD-DTE-2X2XLR is a bidirectional 2x2 audio bridge in a 1U-high black metal enclosure, 8.27 in wide. It runs on PoE+ (IEEE 802.3at, Class 4) from the network switch or from the supplied 12V locking DC supply, and draws 5.4W maximum. Each XLR\/TRS combo input supplies +48V phantom power and has six sensitivity steps, from -35dBV mic level to +24dBu line level. Each balanced XLR output has five selectable levels up to +20dBu.\u003c\/p\u003e\u003cp\u003eBuilt-in DSP adds 8-band parametric EQ (+\/-15dB) on both inputs and both outputs, plus delay on the outputs. Zone tuning, speaker voicing and delay alignment are set at the bridge rather than in an external processor. Two locking RJ45 ports connect to Dante primary and secondary networks: if the primary network fails, the unit switches to the secondary automatically. The bridge supports AES67 and carries Dante audio at 44.1kHz to 96kHz, 16\/24-bit. It is routed in Dante Controller like any Dante device. Its local settings are handled in a built-in Web GUI with separate Admin and User accounts and five preset scenes, or through ASCII commands over TCP\/IP. Its biggest advantage is that one box does the work of separate input and output adapters. A 2x2 job needs one switch port, one PoE budget and one device to configure.\u003c\/p\u003e","brand":"KanexPro","offers":[{"title":"Default Title","offer_id":51569193976047,"sku":"AUD-DTE-2X2XLR","price":549.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/1308\/4143\/files\/AUD-DTE-2X2XLR-zoom1.png?v=1794950647"},{"product_id":"4x4-xlr-dante-audio-bridge-with-8-band-peq-and-delay-1u-rack","title":"4x4 XLR Dante® Audio Bridge, Mic\/Line Inputs with +48V, 8-Band PEQ, Delay, Redundant PoE+, 1U Rack","description":"\u003cp\u003e\u003cstrong\u003eBrings four analog sources onto a Dante® network and sends four Dante® feeds back out to analog, with level matching, EQ and time alignment handled in the bridge itself.\u003c\/strong\u003e AUD-DTE-4X4XLR is a 1U, 19-inch metal rack unit. It has four XLR\/TRS combo mic\/line inputs, each with switchable +48V phantom power, and four balanced XLR line outputs.\u003c\/p\u003e\u003cp\u003eA global line-up setting chooses one of six input sensitivities, from -35dBV for microphones to +24dBu for hot console outputs, and one of five output levels, from +20dBu to -18dBV. The same unit can take condenser mics and wireless receivers and drive professional or consumer-level destinations. Every input and output has an 8-band parametric EQ (+\/-15dB) with parametric, shelf and pass filters, and every output has up to 50ms of delay. Five presets store complete room setups. The unit is configured from its built-in Web GUI or from Dante® Controller, supports AES67, and accepts ASCII commands over TCP\/IP and Telnet from a control system. It has primary and secondary Dante® ports, and both can take PoE+. If the primary network fails, audio switches to the secondary network automatically, and either port can power the unit on its own.\u003c\/p\u003e","brand":"KanexPro","offers":[{"title":"Default Title","offer_id":51569202725103,"sku":"AUD-DTE-4X4XLR","price":849.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/1308\/4143\/files\/AUD-DTE-4X4XLR-zoom1.png?v=1794950985"}],"url":"https:\/\/store.kanexpro.com\/es\/collections\/dante-bridges.oembed","provider":"KanexPro Store","version":"1.0","type":"link"}