{"title":"Dante Wall Plates","description":"Plug a phone, a mic or a mixer into the wall and put it on your Dante network.","products":[{"product_id":"2x2-xlr-and-dante-wall-plate-2-gang-us-poe","title":"2x2 XLR to Dante® Wall Plate, 48V Phantom, US 2-Gang Decora, PoE","description":"\u003cp\u003e\u003cstrong\u003ePuts two mic or line inputs and two line outputs on the Dante® network at any wall position, in a US 2-gang Decora plate on one PoE cable.\u003c\/strong\u003e The AUD-DTE-WPXLR is a 2x2 analog XLR to Dante® converter. It draws 3.6W maximum as an IEEE 802.3af Class 1 powered device, and takes local 12VDC power through a 2-pin Phoenix connector where the switch has no PoE. Each XLR-F input accepts a balanced or unbalanced microphone or line source and has its own switched 48V phantom power. Each XLR-M output drives an amplifier, powered speaker or recorder at up to 18dBu. It is the right choice for lecture halls, worship stages, council chambers and divisible rooms, where a finished wall connection, phantom control at the plate and a single network drop matter more than a rack-mounted I\/O box.\u003c\/p\u003e\u003cp\u003eBuilt on the Dante® Ultimo 2x2 platform, the plate carries 2-channel PCM audio at 44.1, 48, 88.2 or 96kHz. It supports AES67 RTP transport for mixed Dante® and AES67 systems, and its device latency is configurable to 1, 2 or 5ms in Dante® Controller, where it is routed like any other Dante® endpoint to the room DSP, console or amplifier. Five-step input sensitivity and output gain controls set levels at the wall, and a backlit hard button on each input shows the phantom state without opening any software. Because both directions share one plate and one network port, a wall position that once needed a separate input adapter and output adapter, each with its own cable and PoE port, now needs one device and one Cat6 run.\u003c\/p\u003e\u003cp\u003ePair it with KanexPro Dante® amplifiers and wall plates, and plan it in the KanexPro System Planner with the rest of the room (one drawing and parts list).\u003c\/p\u003e","brand":"KanexPro","offers":[{"title":"Default Title","offer_id":51417130074351,"sku":"AUD-DTE-WPXLR","price":349.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/1308\/4143\/files\/AUD-DTE-WPXLR-zoom1.png?v=1793909038"},{"product_id":"bluetooth-to-dante-wall-plate-1-gang-us-poe","title":"Bluetooth to Dante Wall Plate, 1-Gang US, PoE","description":"\u003cp\u003e\u003cstrong\u003ePuts guest Bluetooth audio straight onto a Dante or AES67 network at the wall, from up to two phones, tablets or laptops at once, in a US 1-gang plate on one PoE drop.\u003c\/strong\u003e Per-channel 8-band EQ, input gain and a nameable Bluetooth name are built in. Bluetooth volume, mute and pairing are run from the RelayAV app, with every control reachable through RelayAV's API and MCP. Plan it in the KanexPro System Planner with the rest of the room (one drawing and parts list).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePuts guest Bluetooth audio straight onto a Dante® or AES67 network at the wall, with no separate receiver, no analog hop and no second power supply.\u003c\/strong\u003e The AUD-DTE-WPBT is a US 1-gang wall plate that runs on a single Class 0 IEEE 802.3af PoE drop, or a local 12V DC supply where the switch does not provide PoE. It draws 1.8W at most and connects up to two Bluetooth 5.1 phones, tablets or laptops at the same time. It is the right choice for huddle rooms, classrooms, function rooms and fitness studios where a fixed, controllable BYOD audio point on the Dante network matters more than analog I\/O.\u003c\/p\u003e\u003cp\u003eThe plate decodes SBC, AAC, aptX, aptX Low Latency and aptX HD and sends the audio out as Dante at 44.1 to 96kHz, with device latency set to 2, 3, 4, 5 or 10ms in Dante Controller. It also supports AES67 RTP transport for non-Dante systems. It has a configurable Bluetooth name, call or media bridging and an 8-band parametric EQ per channel. In RelayAV, the KanexPro control app, you set its Bluetooth volume and mute, open the pairing window and manage pairing, and set the input gain, mute and stereo settings. RelayAV does not route its Dante audio: Dante routing is set in Dante Controller. The TCP\/IP and Telnet API gives a control system volume (0 to 100), mute, track and play\/pause control, and reports the connected devices and the track now playing. The strongest differentiator is that the room stays under the integrator's control: each plate can carry a room-specific Bluetooth name, pairing closes automatically after a set window, and two presenters can stay connected and hand over without re-pairing. 12V DC power adapter sold separately.\u003c\/p\u003e","brand":"KanexPro","offers":[{"title":"Default Title","offer_id":51417306202351,"sku":"AUD-DTE-WPBT","price":349.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/1308\/4143\/files\/AUD-DTE-WPBT-zoom1.png?v=1793912967"},{"product_id":"bluetooth-and-rca-3-5mm-to-dante-2x2-wall-plate-2-gang-us-poe","title":"Bluetooth and RCA\/3.5mm to Dante 2x2 Wall Plate, 2-Gang US, PoE","description":"\u003cp\u003e\u003cstrong\u003ePuts a guest's phone, laptop or line-level source (such as a turntable through a phono preamp) onto the Dante® network, and feeds a local speaker, amplifier or recorder from it, through one wall plate on one PoE drop.\u003c\/strong\u003e The AUD-DTE-WPBTRCA fits a standard US 2-gang box. It takes Bluetooth, RCA stereo and 3.5mm stereo inputs, and has RCA and 3.5mm stereo outputs that run at the same time. It draws 3W at most from any IEEE 802.3af PoE switch port, or runs from a local 12V DC supply. It is the right choice for meeting rooms, fellowship halls, classrooms and hospitality zones where open guest access and a local line feed matter more than a DSP-brand endpoint tied to its own ecosystem.\u003c\/p\u003e\u003cp\u003eThe plate sends two channels to Dante, from Bluetooth or from the active analog input, and plays two channels routed from the network on its local outputs. Bluetooth keeps two devices connected at once and has a Bluetooth name you can change, so each room's plate is easy to find. Input sensitivity is set in software from +18dBu down to -18dBV and output gain from +20dBu down to -10dBV, so consumer and pro sources both sit at the right level. An 8-band PEQ and output delay handle room tuning at the wall. You can control the plate from its Web GUI, over TCP\/IP or with the front-panel PAIR button. Channels and device latency are set in Dante Controller, and AES67 RTP support lets it join AES67 systems. One plate does the work of a Bluetooth endpoint, a line-input encoder and a Dante decoder, so it uses one PoE port and one Dante device where that job usually takes two or three. Pair it with the AUD-DTE-WPXLR for balanced XLR sources at the lectern. The 12V DC power supply is sold separately.\u003c\/p\u003e","brand":"KanexPro","offers":[{"title":"Default Title","offer_id":51569217503471,"sku":"AUD-DTE-WPBTRCA","price":449.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0699\/1308\/4143\/files\/AUD-DTE-WPBTRCA-zoom1.png?v=1794951288"}],"url":"https:\/\/store.kanexpro.com\/zh\/collections\/dante-wall-plates.oembed","provider":"KanexPro Store","version":"1.0","type":"link"}