DisplayPort 2.0 8K 40GB 有源光纤长线缆 - 90米

支持 8K@60Hz,DP2.0 UHBR10,4 通道,每通道 10Gbps。即插即用。

跳至产品信息
1 / 1

KanexPro

SKU: CBL-AOCDP8K-90M

UPC: 813982023420

$399.95
查看完整详细信息

KanexPro Active Optical DisplayPort 2.0 Cables deliver full, uncompressed 40Gbps UHBR10 signal across runs of 30, 60, or 90 meters — far beyond copper cable limits. Built on a hybrid 4× optical fiber + 8× copper construction, these plug-and-play cables carry 8K@60Hz, 4K@144Hz, and HDR with zero signal loss, drawing power directly from the DisplayPort source — no wall adapters or repeaters required.

Supporting MST daisy-chaining, AMD FreeSync® 2.0, Dolby Vision, HDCP 1.4/2.2, and full EDID management, the CBL-AOCDP8K series is engineered for professional AV environments where EMI immunity and signal integrity are non-negotiable. Backed by KanexPro's 3-year warranty.

  • 无需外接电源
  • 即插即用
  • 支持 HDCP1.4/2.2
  • 支持 DP2.0 UHBR 10 标准,每通道 10Gbps,总带宽 40Gbps。
  • EDID 支持
  • 无信号损失
  • 支持单流传输 (SST) 和多流传输 (MST) 模式
  • 兼容 AMD® FreeSync™ 2.0 技术
  • 支持高动态范围 (HDR) 视频
  • 支持最高 8K@60Hz 的视频分辨率,包括 4K@144Hz
  • 支持 DisplayPort 双模 (DP++)
标准合规性 DisplayPort 2.0/HBR10,HDCP 1.4/2.2
最大像素时钟频率 810 MHz
最大视频比特率 每通道最高支持 10 Gbps,总计 40 Gbps。
最大色彩深度 48位
支持的最大分辨率 8K@60Hz
DisplayPort 输入/输出 20 针 DisplayPort 接口
力量 无需外部电源
AUX 通道通信 支持双向通信
EDID、HDCP、链路训练等。
HDCP 支持 HDCP 1.4 和 HDCP 2.2
光学技术 4 个独立光通道,10GHz,850nm
光发射器 发射模块:4 个 850 纳米多模垂直腔面发射激光器
光接收器 接收模块:4个GaAs PIN光电二极管
光纤电缆类型 混合光缆,4根光纤和8根铜线
长度 90米
最大拉伸载荷 300牛顿
最小弯曲半径 48毫米
电缆外径(宽+高) 4.8毫米
工作温度 0°C 至 50°C
储存温度 -20°C 至 80°C
工作/存储湿度 5%至85%(非冷凝)
电源 由 DisplayPort 源设备供电
功耗 每端小于0.5瓦

Product Diagram
Product Panel