Dante® Controller Hardware Box, Dual 1G LAN, PoE

Dante® Routing Without a PC on Site - Web GUI, RS-232 and TCP/IP API, Separate Control and Dante® LANs

AUD-DTE-CTLBOXUPC 813982024427
Dante® Controller Hardware Box, Dual 1G LAN, PoE – KanexPro AUD-DTE-CTLBOX
Available through our B2B portal
This part is sold to approved trade accounts.

Resellers, installers, schools and businesses. Approval is usually the same working day.

Overview

Puts Dante® routing in the hands of a web browser and the room's control system, so no PC has to stay running on site to change a route. AUD-DTE-CTLBOX is a compact, black metal controller (8.03 x 3.88 x 0.85 in) built on an ARM Cortex-A7 processor running Linux, with Dante® device management integrated through DAPI. It powers from PoE (IEEE 802.3af) on its Dante® LAN port or a local 12V supply, draws 8.4W maximum, and mounts ten units upright in a 6U V2 rack or two side by side in a single 1U space (racks and 1U panels sold separately). It suits any Dante® system where routes are changed from a web browser or by a third-party control system as part of a room scene. It also suits systems where keeping the control network apart from the audio network matters more than having a dedicated routing workstation.

The built-in Web GUI discovers every Dante® and AES67 device on the network and routes left and right channels independently. Device configuration (sample rate, encoding, latency), clock status, an event log and firmware updates for Ultimo and DEP devices are in the same interface. Control systems reach it through a control API over RS-232 and TCP/IP, with Telnet, SSH and HTTPS that can each be turned on or off. A 6-pin digital I/O with selectable 5V or 12V levels triggers external devices. The network design sets it apart: two physically separate 1G ports put the control system and users on a Control LAN that reaches the Dante® devices through the controller, while the Dante® audio network stays isolated. It manages Dante® and AES67 devices on the network, such as Dante® wall plates, adapters, converters and amplifiers. Dante® endpoints sold separately.

Key features
  • ARM Cortex-A7 1GHz processor running a Linux operating system
  • Built-in Web GUI for Dante® and AES67 device routing, configuration and monitoring
  • Integrated DAPI for Dante® device management and control
  • Two 1G RJ-45 LAN ports keep the control network and the Dante® audio network separate
  • Cable runs up to 328 ft (100 m) over CAT5e/6/6A/7
  • Controls external devices through digital I/O with a selectable 5V or 12V level
  • Control API over RS-232 and TCP/IP
  • Security management: HTTPS, Telnet and SSH can each be turned on or off
  • Powered by PoE (IEEE 802.3af powered device) or a local 12V power supply
  • ESD and surge protection
  • Reliable system design for stable 24/7 operation
  • RelayAV-ready, for KanexPro's RelayAV control app
Technical
ProcessorARM Cortex-A7 1GHz, Linux OS
Dante® ManagementIntegrated DAPI
Network Bandwidth1Gbps
Transmission Distance328 ft (100 m) over CAT5e/6/6A/7
ControlWeb GUI, TCP/IP (Telnet, SSH, API), RS-232, digital I/O
Device SupportDante® and AES67 devices
Default IP AddressControl LAN: 192.168.6.100 (when no DHCP server is present); Dante® LAN: 169.254.8.100
Web GUI Addresshttp://controller.local
Managed Device Settings
Sample Rate44.1kHz, 48kHz, 88.2kHz, 96kHz
EncodingPCM 16, PCM 24, PCM 32
Latency2, 3, 4, 5 or 10 ms
Device Firmware UpdateUltimo and DEP devices
Connection
LAN2x 1G LAN (RJ-45): Dante® LAN (PoE) and Control LAN
RS-2323-pin 3.81mm Phoenix connector
Digital I/O1x 6-pin 3.81mm Phoenix connector: 4 I/O level outputs, 1 ground, 1 VOUT (up to 12V/0.5A); 5V or 12V selected by DIP switch
IR IN1x 3.5mm jack, 12V level (reserved for future use)
IR OUT1x 3.5mm jack (reserved for future use)
Update1x Micro USB, 5-pin female
Indicators / ButtonsPOWER LED, STATUS LED, RESET button
Power
Power SupplyDC 12V/1A, or PoE (IEEE 802.3af powered device) on the Dante® LAN port
Power Consumption8.4W (max.)
Physical
Dimensions (W x D x H)8.03 x 3.88 x 0.85 in (204 x 98.5 x 21.5 mm)
Weight1.15 lbs (521 g)
HousingMetal enclosure
ColorBlack
Mounting6U V2 rack (up to 10 units) or 1U V2 rack (2 units side by side); racks and 1U panels sold separately
Environmental
Operating Temperature32°F to 104°F (0°C to 40°C)
Storage Temperature-4°F to 140°F (-20°C to 60°C)
Operating Humidity20% to 80% RH, non-condensing
Storage Humidity10% to 90% RH, non-condensing
ESD ProtectionIEC 61000-4-2: +/-8kV (air-gap discharge), +/-4kV (contact discharge)
Package Contents
Controller1x Dante® Controller Hardware Box
IR Receiver Cable1x 20kHz–60kHz 12V IR receiver cable, 4.9 ft (1.5 m)
IR Blaster Cable1x IR blaster cable, 4.9 ft (1.5 m)
Phoenix Connectors2x 3-pin 3.81mm (male), 1x 6-pin 3.81mm (male)
Mounting Hardware2x mounting ears, 4x machine screws (KM3x4)
Power Adaptor1x 12V/1A locking power adaptor
Dante® Controller Hardware Box, Dual 1G LAN, PoE panel drawing
Dante® Controller Hardware Box, Dual 1G LAN, PoE system diagram
Dante® Controller Hardware Box, Dual 1G LAN, PoE applications

Buying for resale, a project, or your own site?

Trade accounts see net pricing, stock and one-click reorder from past jobs. Dealers, integrators, businesses, schools and public bodies all qualify. Approval is usually the same working day.