4x4 XLR Dante® Audio Bridge, Mic/Line Inputs with +48V, 8-Band PEQ, Delay, Redundant PoE+, 1U Rack
Level-Match, EQ and Time-Align at the Bridge - 8-Band PEQ on Every Input and Output, up to 50ms Output Delay, 6 Input Sensitivities

Resellers, installers, schools and businesses. Approval is usually the same working day.
Brings four analog sources onto a Dante® network and sends four Dante® feeds back out to analog, with level matching, EQ and time alignment handled in the bridge itself. AUD-DTE-4X4XLR is a 1U, 19-inch metal rack unit. It has four XLR/TRS combo mic/line inputs, each with switchable +48V phantom power, and four balanced XLR line outputs.
A global line-up setting chooses one of six input sensitivities, from -35dBV for microphones to +24dBu for hot console outputs, and one of five output levels, from +20dBu to -18dBV. The same unit can take condenser mics and wireless receivers and drive professional or consumer-level destinations. Every input and output has an 8-band parametric EQ (+/-15dB) with parametric, shelf and pass filters, and every output has up to 50ms of delay. Five presets store complete room setups. The unit is configured from its built-in Web GUI or from Dante® Controller, supports AES67, and accepts ASCII commands over TCP/IP and Telnet from a control system. It has primary and secondary Dante® ports, and both can take PoE+. If the primary network fails, audio switches to the secondary network automatically, and either port can power the unit on its own.
- Four balanced analog inputs on XLR/TRS combo connectors, female
- Four balanced analog outputs on XLR, male
- Dante® 4x4 and AES67 audio input and output
- Primary and secondary Dante® ports on locking RJ45 connectors, both PoE+ (Class 4, IEEE 802.3at); audio switches to the secondary network automatically if the primary fails, and either port can power the unit on its own
- Gigabit (1000M) Dante® network connection over CAT6/6A/7, up to 328ft (100m) to the switch
- Accepts and delivers balanced or unbalanced analog audio
- +48V phantom power on each input, switched on or off per input, with a rear-panel indicator for each input
- Adjustable global 0dBFS line-up selection:
- Six input sensitivity levels: -35dBV, -18dBV, 0dBV, +4dBu, +14dBu, +24dBu
- Five output levels: +20dBu, +14dBu, +4dBu, 0dBV, -18dBV
- Built-in audio DSP for sensitivity gain, 8-band PEQ and delay control
- 8-band PEQ (+/-15dB) on every input and output, with Parametric, Lowpass, Highpass, Low Shelf and High Shelf filter types; stereo linking of input and output pairs; copy, import and export of PEQ settings
- Up to 50ms of delay on every output
- Dante® audio at 44.1kHz, 48kHz, 88.2kHz and 96kHz sampling rates, 16- or 24-bit
- Five preset scenes for saving and recalling complete setups
- Set up from the built-in Web GUI, with separate Admin and User accounts, or from Dante® Controller
- ASCII API control over TCP/IP (default port 8000) and Telnet (default port 23)
- DHCP or static IP addressing, set separately for the primary and secondary networks
- Firmware updates and configuration export and import from the Web GUI
- 12V DC locking power input (max 2.5A) and GND terminal
- Standard 1U 19-inch rack-mount metal chassis
- Works with RelayAV, KanexPro's control app: master volume and mute, each output's volume, mute, delay and level, each input's gain, mute, sensitivity and 48 V phantom power, input and output EQ, presets, auto standby and power, from the RelayAV app
| Audio | |
| Dante® Audio | Dante®/AES67 digital audio in/out; 44.1kHz, 48kHz, 88.2kHz, 96kHz; 16/24-bit |
| Analog Inputs | 4x mic/line, balanced/unbalanced |
| Analog Outputs | 4x line, balanced/unbalanced |
| Input Sensitivity | -35dBV, -18dBV, 0dBV, +4dBu, +14dBu, +24dBu |
| Output Level | +20dBu, +14dBu, +4dBu, 0dBV, -18dBV |
| Input Level | Max 24dBu (12.28Vrms), balanced line audio Max 18dBu (6.14Vrms), unbalanced line audio Min -35dBV (17.78mVrms), balanced mic audio |
| Input Impedance | 20k Ohm balanced 10k Ohm unbalanced |
| Output Level (Max) | 20dBu (7.75Vrms), balanced audio 14dBu (3.875Vrms), unbalanced audio |
| Output Impedance | 600 Ohm balanced 300 Ohm unbalanced |
| Phantom Power | +48V on each input, switchable per input |
| THD+N | < 0.01% at +4dBu, 1kHz |
| S/N Ratio | at least 105dB at +4dBu, 1kHz, A-weighted |
| Dynamic Range | at least 105dB at +4dBu, 1kHz, A-weighted |
| Frequency Response | 20Hz to 20kHz (+/-0.5dB) |
| DSP | |
| Parametric EQ | 8 bands on every input and output; +/-15dB gain; 20Hz to 20kHz; Q 0.02 to 16 |
| Filter Types | Parametric, Lowpass, Highpass, Low Shelf, High Shelf |
| Input Gain | -12dB to +12dB, 0.1dB steps |
| Output Delay | 0 to 50ms per output |
| Presets | 5 user presets |
| Connections | |
| Mic/Line Inputs | 4x XLR/TRS combo, female |
| Line Outputs | 4x XLR, male |
| Dante® Primary | 1x RJ45 locking connector, PoE+/PD (Class 4, IEEE 802.3at) |
| Dante® Secondary | 1x RJ45 locking connector, PoE+/PD (Class 4, IEEE 802.3at) |
| Power | 1x 12V DC, 2-pin locking jack, max 2.5A |
| Ground | 1x GND terminal |
| XLR Pinout | Pin 1: Ground/Shield; Pin 2: Positive/Hot; Pin 3: Negative/Cold |
| Network and Control | |
| Network Bandwidth | Dante® network, 1000M |
| Transmission Distance | 328 ft (100 m) over CAT6/6A/7 |
| Control | Built-in Web GUI, Dante® Controller, TCP/IP and Telnet ASCII API; RelayAV |
| Default Ports | TCP/IP: 8000; Telnet: 23 (both configurable) |
| IP Addressing | DHCP (default) or static, set per network |
| Indicators and Buttons | |
| Front Panel | POWER LED, STATUS LED, RESET button |
| Rear Panel | 4x green 48V phantom power indicators, one per input |
| Power | |
| Power Supply | 12V/2.5A 2-pin locking power supply, or PoE+/PD (Class 4, IEEE 802.3at) |
| Power Consumption | 10.2W max |
| Physical | |
| Housing | Metal enclosure |
| Color | Black |
| Form Factor | Standard 1U 19-inch rack-mount |
| Dimensions (W x D x H) | 17.32 x 7.87 x 1.73 in (440 x 200 x 44 mm) |
| Weight | 4.72 lbs (2.14 kg) |
| Environmental | |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Operating Humidity | 20% to 80% RH, non-condensing |
| Storage Humidity | 10% to 90% RH, non-condensing |
| ESD Protection | IEC 61000-4-2: +/-8kV (air-gap discharge), +/-4kV (contact discharge) |
| Package Contents | |
| 1x | AUD-DTE-4X4XLR 4x4 XLR Dante® Audio Bridge |
| 1x | 12V/2.5A locking power supply with multinational plug adapters |
| 2x | Rack-mounting ears |
| 8x | Machine screws |
Buying for resale, a project, or your own site?
Trade accounts see net pricing, stock and one-click reorder from past jobs. Dealers, integrators, businesses, schools and public bodies all qualify. Approval is usually the same working day.




