2x2 XLR Dante Audio Bridge with DSP, 8-Band PEQ and Delay
Mic-to-Line Analog onto Dante® and Back, Tuned at the Box, from -35dBV Mic to +24dBu Line Level

Resellers, installers, schools and businesses. Approval is usually the same working day.
Puts two analog XLR sources onto a Dante® network and sends two Dante® feeds back out to analog XLR, all from one box at the equipment location. The AUD-DTE-2X2XLR is a bidirectional 2x2 audio bridge in a 1U-high black metal enclosure, 8.27 in wide. It runs on PoE+ (IEEE 802.3at, Class 4) from the network switch or from the supplied 12V locking DC supply, and draws 5.4W maximum. Each XLR/TRS combo input supplies +48V phantom power and has six sensitivity steps, from -35dBV mic level to +24dBu line level. Each balanced XLR output has five selectable levels up to +20dBu.
Built-in DSP adds 8-band parametric EQ (+/-15dB) on both inputs and both outputs, plus delay on the outputs. Zone tuning, speaker voicing and delay alignment are set at the bridge rather than in an external processor. Two locking RJ45 ports connect to Dante primary and secondary networks: if the primary network fails, the unit switches to the secondary automatically. The bridge supports AES67 and carries Dante audio at 44.1kHz to 96kHz, 16/24-bit. It is routed in Dante Controller like any Dante device. Its local settings are handled in a built-in Web GUI with separate Admin and User accounts and five preset scenes, or through ASCII commands over TCP/IP. Its biggest advantage is that one box does the work of separate input and output adapters. A 2x2 job needs one switch port, one PoE budget and one device to configure.
- Two balanced analog inputs on XLR/TRS combo connectors
- Two balanced analog outputs on XLR
- Dante® 2x2 and AES67 audio input and output
- Accepts and delivers balanced or unbalanced analog audio
- +48V phantom power on each input, switchable per input, with a rear-panel indicator for each port
- Adjustable 0dBFS line-up: six input sensitivity levels (-35dBV, -18dBV, 0dBV, +4dBu, +14dBu, +24dBu) and five output levels (+20dBu, +14dBu, +4dBu, 0dBV, -18dBV)
- Built-in audio DSP for sensitivity, gain, 8-band PEQ and delay
- 8-band PEQ (+/-15dB) on inputs and outputs, with Parametric, Lowpass, Highpass, Low Shelf and High Shelf filter types and stereo-link, copy, import and export of EQ settings
- Output delay
- Dante audio at 44.1kHz, 48kHz, 88.2kHz and 96kHz, 16/24-bit
- Dante device latency of 5ms or 10ms, set in Dante Controller
- Configuration through the built-in Web GUI or Dante Controller
- ASCII API control over TCP/IP (default port 8000)
- Settings export and import, and firmware update through the Web GUI
- DHCP or static IP addressing, set separately for the primary and secondary networks
- Powered by PoE+ (Class 4) or a local 12V DC locking power supply
- 1U-high metal enclosure with mounting ears
- Works with RelayAV, KanexPro's control app: each output's gain, mute, delay and level, each input's gain, mute, sensitivity, delay and 48 V phantom power, DCA groups, input and output EQ, expander, limiter, presets, auto standby and power, from the RelayAV app
| Audio | |
| Dante Audio Format | Dante/AES67 digital audio in/out, PCM 2-channel, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 16/24-bit |
| Audio Latency | Dante device latency 5ms or 10ms, set in Dante Controller |
| Network Bandwidth | 100 Mbps Dante network |
| Input Sensitivity | +24dBu, +14dBu, +4dBu, 0dBV, -18dBV, -35dBV |
| Output Levels | +20dBu, +14dBu, +4dBu, 0dBV, -18dBV |
| Phantom Power | +48V on each input, switchable per input |
| DSP | Gain, 8-band PEQ on inputs and outputs (+/-15dB), output delay |
| PEQ Filter Types | Parametric, Lowpass, Highpass, Low Shelf, High Shelf |
| Audio Performance | |
| Frequency Response | 20Hz to 20kHz (+/-0.5dB) |
| THD+N | < 0.01% at +4dBu, 1kHz |
| S/N Ratio | at least 105dB at +4dBu, 1kHz, A-weighted |
| Dynamic Range | at least 105dB at +4dBu, 1kHz, A-weighted |
| Line/Mic Input | |
| Input Level | Max +24dBu (12.28Vrms) balanced line; max +18dBu (6.14Vrms) unbalanced line; min -35dBV (17.78mVrms) balanced mic |
| Input Impedance | 20k Ohm balanced; 10k Ohm unbalanced |
| Line Output | |
| Output Level | Max +20dBu (7.75Vrms) balanced; max +14dBu (3.875Vrms) unbalanced |
| Output Impedance | 600 Ohm balanced; 300 Ohm unbalanced |
| Connections | |
| Mic/Line Inputs | 2x XLR/TRS combo, female; balanced/unbalanced |
| Line Outputs | 2x XLR, male; balanced/unbalanced |
| Dante Primary | 1x RJ45, locking; PoE+ PD (Class 4, IEEE 802.3at); Dante/AES67 audio, Web GUI, TCP/IP and RelayAV control |
| Dante Secondary | 1x RJ45, locking; PoE+ PD (Class 4, IEEE 802.3at); Dante/AES67 audio |
| Power Input | 1x DC 12V, 2-pin locking jack, max 1A |
| Ground | 1x chassis ground terminal |
| Transmission Distance | 328ft (100m) over CAT6/6A/7 |
| Control | |
| Methods | Built-in Web GUI, Dante Controller, ASCII API over TCP/IP; RelayAV |
| TCP/IP Control Port | 8000 (default), configurable |
| Presets | 5 preset scenes |
| IP Addressing | DHCP (default) or static, set separately for primary and secondary networks |
| Front Panel | Power LED, Status LED, Reset button (hold 5 seconds for KanexPro default settings) |
| Protection | |
| ESD Protection | IEC 61000-4-2: +/-8kV (air-gap discharge), +/-4kV (contact discharge) |
| Power | |
| Power Supply | 12V/1A 2-pin locking power supply, or PoE+ PD (Class 4, IEEE 802.3at) |
| Power Consumption | 5.4W max |
| Physical | |
| Housing | Metal enclosure, 1U high |
| Color | Black |
| Dimensions (W x D x H) | 8.27 x 5.91 x 1.73 in (210 x 150 x 44 mm) |
| Weight | 1.98 lbs (0.90 kg) |
| Environmental | |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Operating Humidity | 20% to 80% RH, non-condensing |
| Storage Humidity | 10% to 90% RH, non-condensing |
| Package Contents | |
| Audio Bridge | 1x 2x2 XLR Audio Bridge with Dante® and PoE+ |
| Power Supply | 1x 12V/1A locking power supply with optional multinational conversion plug |
| Mounting Ears | 2x mounting ear |
| Screws | 8x machine screw |
Buying for resale, a project, or your own site?
Trade accounts see net pricing, stock and one-click reorder from past jobs. Dealers, integrators, businesses, schools and public bodies all qualify. Approval is usually the same working day.





