4x4 Mic/Line Dante® and AES67 Bridge with 8-Band PEQ and Delay

Tune and Time-Align at the Interface - 8-Band PEQ on All 8 I/O, Up to 50ms Delay per Output, Mic to +24dBu Line-Up

AUD-DTE-4X4LINEUPC 813982024281
4x4 Mic/Line Dante® and AES67 Bridge with 8-Band PEQ and Delay – KanexPro AUD-DTE-4X4LINE
Available through our B2B portal
This part is sold to approved trade accounts.

Resellers, installers, schools and businesses. Approval is usually the same working day.

Overview

Brings four mic or line sources onto Dante® and returns four Dante® channels to analog, tuned and time-aligned at the interface, from one device on one network drop. The AUD-DTE-4X4LINE is a black metal unit measuring 7.87 x 7.09 x 1.73 in. It has two locking RJ45 Dante® ports, primary and secondary, and runs on PoE+ or the supplied 12V/2.5A locking DC supply, drawing 8.64W at most. Four balanced or unbalanced inputs and four balanced or unbalanced outputs terminate on 3.5mm Phoenix connectors. It is the right choice for meeting rooms, lecture halls, houses of worship and venues where channels per drop and I/O-level DSP matter more than a stack of 2-channel adapters.

Each input has switchable +48V phantom power, and a global 0dBFS line-up runs in six steps from -35dBV to +24dBu. One unit therefore handles a condenser mic, consumer playback gear or a hot +24dBu line feed. Every input and output has an 8-band PEQ (±15dB) with parametric, low-pass, high-pass and shelving filters, and each output has up to 50ms of delay. Five preset scenes store every setting except the network settings. The unit carries Dante® and AES67 audio at 44.1kHz to 96kHz, 16/24-bit. You configure it from the built-in Web GUI or Dante® Controller and control it over TCP/IP or Telnet. It joins the rest of the KanexPro Dante® range, from amplifiers and wall plates to 2-channel adapters, so one room can be built from one catalogue.

Key features
  • 4x mic/line audio inputs, balanced or unbalanced
  • 4x audio outputs, balanced or unbalanced
  • Dante® 4x4 audio input/output with AES67 support
  • 2x locking RJ45 Dante® ports: primary and secondary
  • Switchable +48V phantom power on each input, with a phantom power indicator per input
  • Adjustable global 0dBFS line-up selection: -35dBV, -18dBV, 0dBV, +4dBu, +14dBu, +24dBu
  • Built-in audio DSP for sensitivity, gain, 8-band PEQ and delay
  • 8-band PEQ (±15dB) on every input and output, with parametric, low-pass, high-pass, low-shelf and high-shelf filters
  • Up to 50ms of delay per output
  • PEQ copy, import and export between channels and files
  • Five preset scenes for storing and recalling settings
  • Master group and standby control
  • Dante® audio at 44.1kHz, 48kHz, 88.2kHz and 96kHz sampling rates, 16/24-bit
  • Configuration through the built-in Web GUI, with Admin and User accounts, or Dante® Controller
  • ASCII command control over TCP/IP (port 8000) and Telnet (port 23)
  • Powered by PoE+ or by a 12V/2.5A locking DC supply
  • Up to 328 ft (100m) over CAT6/6A/7
  • Works with RelayAV, KanexPro's control app: master volume and mute, each output's volume, mute, delay and level, each input's gain, mute, sensitivity and 48 V phantom power, input and output EQ, presets, auto standby and power, from the RelayAV app
Audio Inputs
Inputs4x mic/line, balanced or unbalanced
Input LevelMax +24dBu (12.28Vrms), balanced line; max +18dBu (6.14Vrms), unbalanced line; min -35dBV (17.78mVrms), balanced mic
Input Impedance20k Ohm balanced; 10k Ohm unbalanced
Input Sensitivity (0dBFS Line-Up)+24dBu, +14dBu, +4dBu, 0dBV, -18dBV, -35dBV
Input Gain-12dB to +12dB, 0.1dB steps
Phantom Power+48V, switchable per input
Audio Outputs
Outputs4x line, balanced or unbalanced
Output LevelMax +20dBu (7.75Vrms), balanced; max +14dBu (3.875Vrms), unbalanced; min -18dBV
Output Impedance600 Ohm balanced; 300 Ohm unbalanced
Output Delay0 to 50ms per output
Dante® / Network
Dante® Channels4 in / 4 out
Audio FormatDante®/AES67 digital audio in/out, PCM, 44.1kHz–96kHz, 16/24-bit
Sampling Rates44.1kHz, 48kHz, 88.2kHz, 96kHz
Network Bandwidth1000M Dante® network
Dante® PortsPrimary and secondary
Transmission Distance328 ft (100m) over CAT6/6A/7
IP ModeDHCP (default) or static, set separately per network
Audio Performance
THD+N< 0.01% at +4dBu, 1kHz
S/N Ratioat least 105dB at +4dBu, 1kHz, A-weighted
Dynamic Rangeat least 105dB at +4dBu, 1kHz, A-weighted
Frequency Response20Hz to 20kHz (±0.5dB)
DSP
Parametric EQ8 bands on every input and output
Filter TypesParametric, low-pass, high-pass, low-shelf, high-shelf
EQ Gain-15dB to +15dB, 0.1dB steps
EQ Frequency20Hz to 20kHz
EQ Q0.02 to 16, 0.01 steps
EQ PresetsFlat, Custom1, Custom2; stereo-link mode per channel pair
Preset Scenes5
Control
ConfigurationBuilt-in Web GUI (Admin and User accounts); Dante® Controller; RelayAV
API ControlASCII commands over TCP/IP (default port 8000) and Telnet (default port 23)
Firmware UpdateThrough the Web GUI
Connectors
Mic/Line Inputs1x 12-pin 3.5mm Phoenix connector, 4 channels
Line Outputs1x 12-pin 3.5mm Phoenix connector, 4 channels
Dante® Primary1x locking RJ45, PoE+ PD (Class 4, IEEE 802.3at); Dante®/AES67 audio, Web GUI, TCP/IP and RelayAV control
Dante® Secondary1x locking RJ45; Dante®/AES67 audio, Web GUI, TCP/IP and RelayAV control
DC Power1x 2-pin 12V DC locking power jack, max 2.5A
Indicators and Buttons
Front PanelPOWER LED, STATUS LED, RESET button
Rear Panel48V phantom power indicator per input
Power
Power Supply12V/2.5A locking DC power supply, or PoE+ PD (Class 4, IEEE 802.3at)
Power Consumption8.64W (max)
Physical
HousingMetal enclosure
ColorBlack
Dimensions (W x D x H)7.87 x 7.09 x 1.73 in (200 x 180 x 44 mm)
Weight2.28 lbs (1.035 kg)
Environmental
Operating Temperature32°F to 104°F (0°C to 40°C)
Storage Temperature-4°F to 140°F (-20°C to 60°C)
Operating Humidity20% to 80% RH, non-condensing
Storage Humidity10% to 90% RH, non-condensing
Package Contents
1x4x4 Line Audio Bridge with Dante® and PoE+
1x12V/2.5A locking power supply with optional multinational conversion plugs
2xMounting ear
10xMachine screw
2x12-pin 3.5mm Phoenix connector (male)
4x4 Mic/Line Dante® and AES67 Bridge with 8-Band PEQ and Delay panel drawing
4x4 Mic/Line Dante® and AES67 Bridge with 8-Band PEQ and Delay system diagram
4x4 Mic/Line Dante® and AES67 Bridge with 8-Band PEQ and Delay applications
in the same range
AUD-DTE-4X4XLR 4x4 XLR Dante® Audio Bridge, Mic/Line Inputs with +48V, 8-Ban...
Level-Match, EQ and Time-Align at the Bridge - 8-Band PEQ on Every In...
B2B portal only
in the same range
AUD-DTE-2X2XLR 2x2 XLR Dante Audio Bridge with DSP, 8-Band PEQ and Delay
Mic-to-Line Analog onto Dante® and Back, Tuned at the Box, from -35dB...
B2B portal only
in the same range
AUD-DTE-8X8XLR 8x8 XLR to Dante/AES67 Audio Bridge with +48V Phantom, PEQ an...
Mic and Line Sources onto a Dante® Network Without a Separate Preamp ...
B2B portal only
in the same range
AUD-DTE-8X8LINE Dante 8x8 Analog Audio Bridge with DSP, Phoenix I/O, PoE+
Replace a Bank of 2-Channel Dante® Adapters with One Unit - 8 Mic/Lin...
B2B portal only
in the same range
AUD-DTE-16X16XLR 16x16 XLR Audio Bridge with Dante® and PoE+, 19" Rack Mount
One Chassis Replaces Separate Input and Output Units - 16 XLR/TRS Com...
B2B portal only

Buying for resale, a project, or your own site?

Trade accounts see net pricing, stock and one-click reorder from past jobs. Dealers, integrators, businesses, schools and public bodies all qualify. Approval is usually the same working day.