16x16 XLR Audio Bridge with Dante® and PoE+, 19" Rack Mount

One Chassis Replaces Separate Input and Output Units - 16 XLR/TRS Combo In, 16 XLR Out, +48V Phantom Power

AUD-DTE-16X16XLRUPC 813982024380
16x16 XLR Audio Bridge with Dante® and PoE+, 19" Rack Mount – KanexPro AUD-DTE-16X16XLR
Available through our B2B portal
This part is sold to approved trade accounts.

Resellers, installers, schools and businesses. Approval is usually the same working day.

Overview

Puts sixteen microphone or line sources onto a Dante® network and returns sixteen balanced feeds to analog gear, all from one 19" rack-mount chassis. The AUD-DTE-16X16XLR has 16 XLR/TRS combo inputs, each with switchable +48V phantom power, and 16 balanced XLR outputs. All 32 channels are bridged to and from Dante® and AES67 through primary and secondary RJ45 ports.

Each input has six sensitivity settings, from -35dBV for microphones up to +24dBu for hot line-level gear, plus a fine gain trim of +/-12dB. An 8-band parametric EQ (+/-15dB) is available on every input and output, each output has delay, and five presets store complete room setups. Routing and latency are set in Dante® Controller, and levels, EQ and presets are set from the built-in Web GUI or by ASCII commands over TCP/IP or Telnet. If the primary network fails, the secondary port takes over automatically. The strongest reason to choose it is consolidation: one chassis does the work of separate 16-channel input and output units, or of sixteen 2-channel endpoints, at the head end.

Key features
  • 16 balanced analog inputs on XLR/TRS combo connectors
  • 16 balanced analog outputs on XLR connectors
  • Dante® 16x16 and AES67 audio input and output
  • Primary and secondary Dante® RJ45 ports; if the primary network fails, the secondary port takes over automatically
  • Accepts and delivers balanced or unbalanced analog audio
  • +48V phantom power on each input, switched per input from the Web GUI or the API, with a rear-panel indicator for each input
  • Global 0dBFS line-up selection: -35dBV, -18dBV, 0dBV, +4dBu, +14dBu or +24dBu
  • Per-input gain trim from -12dB to +12dB in 0.1dB steps
  • Per-output level selection: +20dBu, +14dBu, +4dBu, 0dBV or -18dBV
  • Built-in DSP for sensitivity gain, 8-band PEQ and delay
  • 8-band PEQ on every input and output (+/-15dB), with Parametric, Lowpass, Highpass, Low Shelf and High Shelf filters, stereo-pair linking, and copy, import and export of settings
  • Delay on each output
  • Dante® audio at 44.1kHz, 48kHz, 88.2kHz and 96kHz sampling rates, at 16 or 24 bits
  • Dante® device latency of 2, 3, 4, 5 or 10ms
  • Five preset scenes, each storing every setting except the network settings
  • Channel names of up to 32 characters for every input and output
  • Configuration from the built-in Web GUI, with separate Admin and User accounts, or from Dante® Controller
  • ASCII API control over TCP/IP (port 8000) and Telnet (port 23); both ports can be changed
  • Configuration export and import, and firmware update from the Web GUI
  • Standard 19" rack-mount metal enclosure with mounting ears included
  • Works with RelayAV, KanexPro's control app: each output's gain, mute, delay and level, each input's gain, mute, sensitivity, delay and 48 V phantom power, DCA groups, input and output EQ, expander, limiter, presets, auto standby and power, from the RelayAV app
Audio and Network
Audio Channels16 analog inputs, 16 analog outputs
Dante® Audio FormatDante®/AES67 digital audio in/out; 44.1kHz, 48kHz, 88.2kHz or 96kHz; 16-bit or 24-bit
Audio LatencyDante® device latency of 2, 3, 4, 5 or 10ms, set in Dante® Controller
Network BandwidthDante® network, 1000Mbps
Transmission Distance328ft (100m) over CAT6/6A/7
Audio Performance
THD+N< 0.01% at +4dBu, 1kHz
S/N Ratioat least 105dB at +4dBu, 1kHz, A-weighted
Dynamic Rangeat least 105dB at +4dBu, 1kHz, A-weighted
Frequency Response20Hz to 20kHz (+/-0.5dB)
Mic/Line Inputs
Connectors16 × XLR/TRS combo, female
SignalAnalog audio, balanced or unbalanced
Input Level, LineMax +24dBu (12.28Vrms) balanced; max +18dBu (6.14Vrms) unbalanced
Input Level, MicMin -35dBV
Input Sensitivity+24dBu, +14dBu, +4dBu, 0dBV, -18dBV or -35dBV, per input
Input Gain Trim-12dB to +12dB in 0.1dB steps
Input Impedance20k Ohm balanced; 10k Ohm unbalanced
Phantom Power+48V, switchable per input
Line Outputs
Connectors16 × XLR, male
SignalAnalog audio, balanced or unbalanced
Output LevelMax +20dBu (7.75Vrms) balanced; max +14dBu (3.875Vrms) unbalanced; min -18dBV
Output Level Selection+20dBu, +14dBu, +4dBu, 0dBV or -18dBV, per output
Output Impedance600 Ohm balanced; 300 Ohm unbalanced
XLR PinoutPin 1 Ground/Shield; Pin 2 Positive/Hot; Pin 3 Negative/Cold (inputs and outputs)
DSP
Parametric EQ8 bands on every input and output
Filter TypesParametric, Lowpass, Highpass, Low Shelf, High Shelf
EQ Gain-15dB to +15dB in 0.1dB steps
EQ Frequency20Hz to 20kHz
EQ Q0.02 to 16 in 0.01 steps
Output DelayAdjustable per output
Presets5 scenes
Control
ConfigurationBuilt-in Web GUI (Admin and User accounts); Dante® Controller; RelayAV
API ControlASCII commands over TCP/IP (default port 8000) and Telnet (default port 23)
IP AddressingDHCP (default) or static, set separately for primary and secondary networks
Connectors
Mic/Line Inputs16 × XLR/TRS combo, female
Line Outputs16 × XLR, male
Dante® Primary1 × locking RJ45, PoE+ PD (IEEE 802.3at, Class 4); Dante®/AES67 audio, Web GUI, TCP/IP and RelayAV control
Dante® Secondary1 × locking RJ45, PoE+ PD (IEEE 802.3at, Class 4); Dante®/AES67 audio, Web GUI, TCP/IP and RelayAV control
Power1 × 2-pin locking DC jack, 12V DC, max 2.5A
Ground1 × chassis ground terminal
Indicators and Buttons
Front PanelPOWER LED, STATUS LED, RESET button
Rear Panel+48V phantom power indicators
Power
Power Consumption19.44W max
Physical
HousingMetal enclosure
ColorBlack
MountingStandard 19" rack mount
Dimensions (W × D × H)17.32 × 7.87 × 3.46 in (440 × 200 × 88mm)
Weight6.88 lbs (3.12kg)
Environmental
Operating Temperature32°F to 104°F (0°C to 40°C)
Storage Temperature-4°F to 140°F (-20°C to 60°C)
Operating Humidity20% to 80% RH, non-condensing
Storage Humidity10% to 90% RH, non-condensing
ESD ProtectionIEC 61000-4-2: +/-8kV air-gap discharge, +/-4kV contact discharge
Package Contents
1AUD-DTE-16X16XLR 16x16 XLR Audio Bridge with Dante® and PoE+
112V/2.5A locking power supply with multinational conversion plugs
2Mounting ears
8Machine screws
16x16 XLR Audio Bridge with Dante® and PoE+, 19" Rack Mount panel drawing
16x16 XLR Audio Bridge with Dante® and PoE+, 19" Rack Mount system diagram
16x16 XLR Audio Bridge with Dante® and PoE+, 19" Rack Mount applications
in the same range
AUD-DTE-4X4XLR 4x4 XLR Dante® Audio Bridge, Mic/Line Inputs with +48V, 8-Ban...
Level-Match, EQ and Time-Align at the Bridge - 8-Band PEQ on Every In...
B2B portal only
in the same range
AUD-DTE-8X8XLR 8x8 XLR to Dante/AES67 Audio Bridge with +48V Phantom, PEQ an...
Mic and Line Sources onto a Dante® Network Without a Separate Preamp ...
B2B portal only
in the same range
AUD-DTE-8X8LINE Dante 8x8 Analog Audio Bridge with DSP, Phoenix I/O, PoE+
Replace a Bank of 2-Channel Dante® Adapters with One Unit - 8 Mic/Lin...
B2B portal only
in the same range
AUD-DTE-2X2XLR 2x2 XLR Dante Audio Bridge with DSP, 8-Band PEQ and Delay
Mic-to-Line Analog onto Dante® and Back, Tuned at the Box, from -35dB...
B2B portal only
in the same range
AUD-DTE-4X4LINE 4x4 Mic/Line Dante® and AES67 Bridge with 8-Band PEQ and Delay
Tune and Time-Align at the Interface - 8-Band PEQ on All 8 I/O, Up to...
B2B portal only

Buying for resale, a project, or your own site?

Trade accounts see net pricing, stock and one-click reorder from past jobs. Dealers, integrators, businesses, schools and public bodies all qualify. Approval is usually the same working day.