2x2 XLR Dante Audio Bridge with DSP, 8-Band PEQ and Delay

Mic-to-Line Analog onto Dante® and Back, Tuned at the Box, from -35dBV Mic to +24dBu Line Level

AUD-DTE-2X2XLRUPC 813982024397
2x2 XLR Dante Audio Bridge with DSP, 8-Band PEQ and Delay – KanexPro AUD-DTE-2X2XLR
Available through our B2B portal
This part is sold to approved trade accounts.

Resellers, installers, schools and businesses. Approval is usually the same working day.

Overview

Puts two analog XLR sources onto a Dante® network and sends two Dante® feeds back out to analog XLR, all from one box at the equipment location. The AUD-DTE-2X2XLR is a bidirectional 2x2 audio bridge in a 1U-high black metal enclosure, 8.27 in wide. It runs on PoE+ (IEEE 802.3at, Class 4) from the network switch or from the supplied 12V locking DC supply, and draws 5.4W maximum. Each XLR/TRS combo input supplies +48V phantom power and has six sensitivity steps, from -35dBV mic level to +24dBu line level. Each balanced XLR output has five selectable levels up to +20dBu.

Built-in DSP adds 8-band parametric EQ (+/-15dB) on both inputs and both outputs, plus delay on the outputs. Zone tuning, speaker voicing and delay alignment are set at the bridge rather than in an external processor. Two locking RJ45 ports connect to Dante primary and secondary networks: if the primary network fails, the unit switches to the secondary automatically. The bridge supports AES67 and carries Dante audio at 44.1kHz to 96kHz, 16/24-bit. It is routed in Dante Controller like any Dante device. Its local settings are handled in a built-in Web GUI with separate Admin and User accounts and five preset scenes, or through ASCII commands over TCP/IP. Its biggest advantage is that one box does the work of separate input and output adapters. A 2x2 job needs one switch port, one PoE budget and one device to configure.

Key features
  • Two balanced analog inputs on XLR/TRS combo connectors
  • Two balanced analog outputs on XLR
  • Dante® 2x2 and AES67 audio input and output
  • Accepts and delivers balanced or unbalanced analog audio
  • +48V phantom power on each input, switchable per input, with a rear-panel indicator for each port
  • Adjustable 0dBFS line-up: six input sensitivity levels (-35dBV, -18dBV, 0dBV, +4dBu, +14dBu, +24dBu) and five output levels (+20dBu, +14dBu, +4dBu, 0dBV, -18dBV)
  • Built-in audio DSP for sensitivity, gain, 8-band PEQ and delay
  • 8-band PEQ (+/-15dB) on inputs and outputs, with Parametric, Lowpass, Highpass, Low Shelf and High Shelf filter types and stereo-link, copy, import and export of EQ settings
  • Output delay
  • Dante audio at 44.1kHz, 48kHz, 88.2kHz and 96kHz, 16/24-bit
  • Dante device latency of 5ms or 10ms, set in Dante Controller
  • Configuration through the built-in Web GUI or Dante Controller
  • ASCII API control over TCP/IP (default port 8000)
  • Settings export and import, and firmware update through the Web GUI
  • DHCP or static IP addressing, set separately for the primary and secondary networks
  • Powered by PoE+ (Class 4) or a local 12V DC locking power supply
  • 1U-high metal enclosure with mounting ears
  • Works with RelayAV, KanexPro's control app: each output's gain, mute, delay and level, each input's gain, mute, sensitivity, delay and 48 V phantom power, DCA groups, input and output EQ, expander, limiter, presets, auto standby and power, from the RelayAV app
Audio
Dante Audio FormatDante/AES67 digital audio in/out, PCM 2-channel, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 16/24-bit
Audio LatencyDante device latency 5ms or 10ms, set in Dante Controller
Network Bandwidth100 Mbps Dante network
Input Sensitivity+24dBu, +14dBu, +4dBu, 0dBV, -18dBV, -35dBV
Output Levels+20dBu, +14dBu, +4dBu, 0dBV, -18dBV
Phantom Power+48V on each input, switchable per input
DSPGain, 8-band PEQ on inputs and outputs (+/-15dB), output delay
PEQ Filter TypesParametric, Lowpass, Highpass, Low Shelf, High Shelf
Audio Performance
Frequency Response20Hz to 20kHz (+/-0.5dB)
THD+N< 0.01% at +4dBu, 1kHz
S/N Ratioat least 105dB at +4dBu, 1kHz, A-weighted
Dynamic Rangeat least 105dB at +4dBu, 1kHz, A-weighted
Line/Mic Input
Input LevelMax +24dBu (12.28Vrms) balanced line; max +18dBu (6.14Vrms) unbalanced line; min -35dBV (17.78mVrms) balanced mic
Input Impedance20k Ohm balanced; 10k Ohm unbalanced
Line Output
Output LevelMax +20dBu (7.75Vrms) balanced; max +14dBu (3.875Vrms) unbalanced
Output Impedance600 Ohm balanced; 300 Ohm unbalanced
Connections
Mic/Line Inputs2x XLR/TRS combo, female; balanced/unbalanced
Line Outputs2x XLR, male; balanced/unbalanced
Dante Primary1x RJ45, locking; PoE+ PD (Class 4, IEEE 802.3at); Dante/AES67 audio, Web GUI, TCP/IP and RelayAV control
Dante Secondary1x RJ45, locking; PoE+ PD (Class 4, IEEE 802.3at); Dante/AES67 audio
Power Input1x DC 12V, 2-pin locking jack, max 1A
Ground1x chassis ground terminal
Transmission Distance328ft (100m) over CAT6/6A/7
Control
MethodsBuilt-in Web GUI, Dante Controller, ASCII API over TCP/IP; RelayAV
TCP/IP Control Port8000 (default), configurable
Presets5 preset scenes
IP AddressingDHCP (default) or static, set separately for primary and secondary networks
Front PanelPower LED, Status LED, Reset button (hold 5 seconds for KanexPro default settings)
Protection
ESD ProtectionIEC 61000-4-2: +/-8kV (air-gap discharge), +/-4kV (contact discharge)
Power
Power Supply12V/1A 2-pin locking power supply, or PoE+ PD (Class 4, IEEE 802.3at)
Power Consumption5.4W max
Physical
HousingMetal enclosure, 1U high
ColorBlack
Dimensions (W x D x H)8.27 x 5.91 x 1.73 in (210 x 150 x 44 mm)
Weight1.98 lbs (0.90 kg)
Environmental
Operating Temperature32°F to 104°F (0°C to 40°C)
Storage Temperature-4°F to 140°F (-20°C to 60°C)
Operating Humidity20% to 80% RH, non-condensing
Storage Humidity10% to 90% RH, non-condensing
Package Contents
Audio Bridge1x 2x2 XLR Audio Bridge with Dante® and PoE+
Power Supply1x 12V/1A locking power supply with optional multinational conversion plug
Mounting Ears2x mounting ear
Screws8x machine screw
2x2 XLR Dante Audio Bridge with DSP, 8-Band PEQ and Delay panel drawing
2x2 XLR Dante Audio Bridge with DSP, 8-Band PEQ and Delay system diagram
2x2 XLR Dante Audio Bridge with DSP, 8-Band PEQ and Delay applications
in the same range
AUD-DTE-8X8XLR 8x8 XLR to Dante/AES67 Audio Bridge with +48V Phantom, PEQ an...
Mic and Line Sources onto a Dante® Network Without a Separate Preamp ...
B2B portal only
in the same range
AUD-DTE-4X4LINE 4x4 Mic/Line Dante® and AES67 Bridge with 8-Band PEQ and Delay
Tune and Time-Align at the Interface - 8-Band PEQ on All 8 I/O, Up to...
B2B portal only
in the same range
AUD-DTE-4X4XLR 4x4 XLR Dante® Audio Bridge, Mic/Line Inputs with +48V, 8-Ban...
Level-Match, EQ and Time-Align at the Bridge - 8-Band PEQ on Every In...
B2B portal only
in the same range
AUD-DTE-8X8LINE Dante 8x8 Analog Audio Bridge with DSP, Phoenix I/O, PoE+
Replace a Bank of 2-Channel Dante® Adapters with One Unit - 8 Mic/Lin...
B2B portal only
in the same range
AUD-DTE-16X16XLR 16x16 XLR Audio Bridge with Dante® and PoE+, 19" Rack Mount
One Chassis Replaces Separate Input and Output Units - 16 XLR/TRS Com...
B2B portal only
a similar product
AUD-DTE-WPBTRCA Bluetooth and RCA/3.5mm to Dante 2x2 Wall Plate, 2-Gang US, PoE
Guest Audio onto Dante® and a Local Line Feed Back Out, from One PoE ...
Out of stock

Buying for resale, a project, or your own site?

Trade accounts see net pricing, stock and one-click reorder from past jobs. Dealers, integrators, businesses, schools and public bodies all qualify. Approval is usually the same working day.