8x8 XLR to Dante/AES67 Audio Bridge with +48V Phantom, PEQ and Delay, 1U

Mic and Line Sources onto a Dante® Network Without a Separate Preamp or DSP - 8-Band PEQ, 50ms Delay, Web GUI Control

AUD-DTE-8X8XLRUPC 813982024304
8x8 XLR to Dante/AES67 Audio Bridge with +48V Phantom, PEQ and Delay, 1U – KanexPro AUD-DTE-8X8XLR
Available through our B2B portal
This part is sold to approved trade accounts.

Resellers, installers, schools and businesses. Approval is usually the same working day.

Overview

Puts eight mic or line sources onto a Dante® network, and brings eight Dante® channels back out to analog XLR, from a single rack unit with no separate preamp or DSP. AUD-DTE-8X8XLR is a 1U, 19-inch metal bridge. It has eight XLR/TRS combo inputs with switchable +48V phantom power on every channel and eight balanced XLR line outputs.

Each input offers six sensitivity settings from -35dBV to +24dBu, so wireless receivers, condenser mics, mixers and playback devices connect directly. Each output offers five levels up to +20dBu, so it can feed amplifiers, IEM transmitters and legacy DSPs. On-board DSP provides gain, an 8-band parametric EQ on every input and output, up to 50ms of output delay, and five recallable preset scenes. The unit carries Dante® 8x8 with AES67 at 44.1kHz to 96kHz, 16 or 24 bits, with device latency selectable from 2ms to 10ms. You can set it up in Dante® Controller and the built-in Web GUI, and control systems can drive it over an ASCII API on TCP/IP or Telnet. One unit does the work of eight 2-channel endpoints.

Key features
  • Eight balanced analog inputs on XLR/TRS combo connectors that accept XLR or TRS plugs
  • Eight balanced analog outputs on male XLR connectors
  • Dante® 8x8 and AES67 audio input and output
  • Balanced and unbalanced analog audio supported on both inputs and outputs
  • +48V phantom power on every input, switchable per channel, with a rear-panel indicator for each input
  • Adjustable global 0dBFS line-up, with six input sensitivity levels (+24dBu, +14dBu, +4dBu, 0dBV, -18dBV, -35dBV) and five output levels (+20dBu, +14dBu, +4dBu, 0dBV, -18dBV)
  • Built-in audio DSP for sensitivity, gain, 8-band parametric EQ and delay
  • 8-band PEQ on every input and output with +/-15dB of gain per band, and Parametric, Lowpass, Highpass, Low Shelf and High Shelf filter types
  • Up to 50ms of delay per output
  • Stereo-pair EQ linking, plus EQ copy, import and export between channels
  • Five preset scenes that store every setting except network configuration
  • Dante® sampling rates of 44.1kHz, 48kHz, 88.2kHz and 96kHz at 16 or 24 bits
  • Dante® device latency selectable at 2, 3, 4, 5 or 10ms
  • Configuration in the built-in Web GUI (Admin and User accounts) or in Dante® Controller
  • ASCII API control over TCP/IP and Telnet for third-party control systems
  • DHCP or static IP addressing per network, with host-name (.local) access to the Web GUI
  • Powered from a PoE+ (IEEE 802.3at, Class 4) switch port or the included 12V locking power supply, 15.36W max, so a rack with PoE+ switching needs no local outlet
  • Standby and sleep modes with adjustable auto-standby
  • Settings export and import, and firmware updates from the Web GUI
  • Up to 328ft (100m) per network run over CAT6/6A/7
  • Standard 1U 19-inch rack-mount metal enclosure with grounding terminal
  • Works with RelayAV, KanexPro's control app: each output's gain, mute, delay and level, each input's gain, mute, sensitivity, delay and 48 V phantom power, DCA groups, input and output EQ, expander, limiter, presets, auto standby and power, from the RelayAV app
Analog Audio
Inputs8x XLR/TRS combo, female; balanced/unbalanced; mic or line level
Outputs8x XLR, male; balanced/unbalanced; line level
Phantom Power+48V, switchable per input
Input Sensitivity+24dBu, +14dBu, +4dBu, 0dBV, -18dBV, -35dBV (selectable per input)
Input LevelBalanced line: max +24dBu (12.28Vrms); unbalanced line: max +18dBu (6.14Vrms); balanced mic: min -35dBV (17.78mVrms)
Input Impedance20k Ohm balanced; 10k Ohm unbalanced
Output Level Settings+20dBu, +14dBu, +4dBu, 0dBV, -18dBV (selectable per output)
Output LevelBalanced: max +20dBu (7.75Vrms); unbalanced: max +14dBu (3.875Vrms); min -18dBV
Output Impedance600 Ohm balanced; 300 Ohm unbalanced
Frequency Response20Hz–20kHz (+/-0.5dB)
THD+N<0.01% at +4dBu, 1kHz
S/N Ratioat least 105dB at +4dBu, 1kHz, A-weighted
Dynamic Rangeat least 105dB at +4dBu, 1kHz, A-weighted
XLR PinoutPin 1: ground/shield; Pin 2: positive (hot); Pin 3: negative (cold)
DSP
Input Gain-12dB to +12dB in 0.1dB steps, with mute, per input
Parametric EQ8 bands per input and output; Parametric, Lowpass, Highpass, Low Shelf, High Shelf
EQ RangeGain +/-15dB (0.1dB steps); frequency 20Hz–20kHz; Q 0.02–16 (0.01 steps)
Delay0–50ms per output
Preset Scenes5 (store all settings except network configuration)
Dante® / Network
Dante® Channels8 x 8, Dante®/AES67
Sample Rate / Bit Depth44.1kHz, 48kHz, 88.2kHz, 96kHz; 16/24-bit
Device Latency2, 3, 4, 5 or 10ms (set in Dante® Controller)
Network Bandwidth1000Mbps
Transmission Distance328ft (100m) over CAT6/6A/7
IP AddressingDHCP (default) or static, per network
Control
ConfigurationBuilt-in Web GUI (Admin and User accounts); Dante® Controller; RelayAV
API ControlASCII commands over TCP/IP (default port 8000) and Telnet (default port 23)
Firmware UpdateVia Web GUI
Indicators and Buttons
Front PanelPOWER LED, STATUS LED, RESET button
Rear Panel8x +48V phantom power indicators; GND terminal
Power
Power Consumption15.36W max
Physical
Form Factor1U, 19-inch rack mount
HousingMetal, black
Dimensions (W x D x H)17.32 x 7.87 x 1.75 in (440 x 200 x 44.5 mm)
Weight4.85 lbs (2.2 kg)
Environmental
Operating Temperature32°F to 104°F (0°C to 40°C)
Storage Temperature-4°F to 140°F (-20°C to 60°C)
Operating Humidity20% to 80% RH, non-condensing
Storage Humidity10% to 90% RH, non-condensing
ESD ProtectionIEC 61000-4-2: +/-8kV air-gap discharge, +/-4kV contact discharge
Package Contents
1x8x8 XLR to Dante®/AES67 Audio Bridge (AUD-DTE-8X8XLR)
1x12V/2.5A locking power supply
2xRack-mounting ears
8xMachine screws
8x8 XLR to Dante/AES67 Audio Bridge with +48V Phantom, PEQ and Delay, 1U panel drawing
8x8 XLR to Dante/AES67 Audio Bridge with +48V Phantom, PEQ and Delay, 1U system diagram
8x8 XLR to Dante/AES67 Audio Bridge with +48V Phantom, PEQ and Delay, 1U applications
in the same range
AUD-DTE-2X2XLR 2x2 XLR Dante Audio Bridge with DSP, 8-Band PEQ and Delay
Mic-to-Line Analog onto Dante® and Back, Tuned at the Box, from -35dB...
B2B portal only
in the same range
AUD-DTE-4X4XLR 4x4 XLR Dante® Audio Bridge, Mic/Line Inputs with +48V, 8-Ban...
Level-Match, EQ and Time-Align at the Bridge - 8-Band PEQ on Every In...
B2B portal only
in the same range
AUD-DTE-4X4LINE 4x4 Mic/Line Dante® and AES67 Bridge with 8-Band PEQ and Delay
Tune and Time-Align at the Interface - 8-Band PEQ on All 8 I/O, Up to...
B2B portal only
in the same range
AUD-DTE-16X16XLR 16x16 XLR Audio Bridge with Dante® and PoE+, 19" Rack Mount
One Chassis Replaces Separate Input and Output Units - 16 XLR/TRS Com...
B2B portal only
in the same range
AUD-DTE-8X8LINE Dante 8x8 Analog Audio Bridge with DSP, Phoenix I/O, PoE+
Replace a Bank of 2-Channel Dante® Adapters with One Unit - 8 Mic/Lin...
B2B portal only

Buying for resale, a project, or your own site?

Trade accounts see net pricing, stock and one-click reorder from past jobs. Dealers, integrators, businesses, schools and public bodies all qualify. Approval is usually the same working day.