Bluetooth and RCA/3.5mm to Dante 2x2 Wall Plate, 2-Gang US, PoE

Guest Audio onto Dante® and a Local Line Feed Back Out, from One PoE Drop

AUD-DTE-WPBTRCAUPC 813982024410
Bluetooth and RCA/3.5mm to Dante 2x2 Wall Plate, 2-Gang US, PoE – KanexPro AUD-DTE-WPBTRCA
Currently out of stock
We are restocking this part. Ask us when it will be back.
Overview

Puts a guest's phone, laptop or line-level source (such as a turntable through a phono preamp) onto the Dante® network, and feeds a local speaker, amplifier or recorder from it, through one wall plate on one PoE drop. The AUD-DTE-WPBTRCA fits a standard US 2-gang box. It takes Bluetooth, RCA stereo and 3.5mm stereo inputs, and has RCA and 3.5mm stereo outputs that run at the same time. It draws 3W at most from any IEEE 802.3af PoE switch port, or runs from a local 12V DC supply. It is the right choice for meeting rooms, fellowship halls, classrooms and hospitality zones where open guest access and a local line feed matter more than a DSP-brand endpoint tied to its own ecosystem.

The plate sends two channels to Dante, from Bluetooth or from the active analog input, and plays two channels routed from the network on its local outputs. Bluetooth keeps two devices connected at once and has a Bluetooth name you can change, so each room's plate is easy to find. Input sensitivity is set in software from +18dBu down to -18dBV and output gain from +20dBu down to -10dBV, so consumer and pro sources both sit at the right level. An 8-band PEQ and output delay handle room tuning at the wall. You can control the plate from its Web GUI, over TCP/IP or with the front-panel PAIR button. Channels and device latency are set in Dante Controller, and AES67 RTP support lets it join AES67 systems. One plate does the work of a Bluetooth endpoint, a line-input encoder and a Dante decoder, so it uses one PoE port and one Dante device where that job usually takes two or three. Pair it with the AUD-DTE-WPXLR for balanced XLR sources at the lectern. The 12V DC power supply is sold separately.

Key features
  • Dante® network wall plate for US 2-gang boxes, with Bluetooth, RCA or 3.5mm audio in and RCA and 3.5mm audio out
  • Two channels to Dante from Bluetooth or analog input, and two channels from Dante to the analog outputs
  • Up to two Bluetooth devices connected at the same time
  • Bluetooth name you can change (up to 24 bytes), so users pick the right plate in a building with several
  • Bluetooth pairing window adjustable from 30 to 300 seconds, or left open with no time limit
  • Input switches between Bluetooth, RCA and 3.5mm, with automatic or manual source selection and a choice of analog input priority
  • RCA and 3.5mm outputs carry the same audio at the same time
  • Analog input sensitivity set in software: +18dBu, +4dBu, 0dBu, 0dBV, -10dBV or -18dBV
  • Analog output gain set in software: +20dBu, +4dBu, 0dBu, 0dBV or -10dBV
  • Per-channel input gain, output volume, mute and output delay (0–50ms), with left/right stereo linking
  • 8-band parametric EQ on every input and output channel, with Parametric, Lowpass, Highpass, Low Shelf and High Shelf filters; export and import of EQ settings
  • Bluetooth volume adjustable from 0 to 100
  • Bluetooth previous track, next track and play/pause control, with artist, album and track display
  • Bluetooth audio bridging selectable: call audio, media audio, or both
  • Bluetooth firmware upgrade through the USB-C service port
  • Dante® sample rates of 44.1, 48, 88.2 and 96kHz
  • Dante® device latency set in Dante® Controller: 2, 3, 4, 5 or 10ms
  • Supports AES67 RTP audio transport
  • Class 0 IEEE 802.3af PoE, so any PoE switch can power the unit
  • Runs from a local 12V DC adapter (sold separately) where the switch has no PoE
  • Control from the front-panel PAIR button, over TCP/IP or Telnet, or through the built-in Web GUI
  • Web GUI with separate Admin and User accounts. The User account opens only the Control page
  • Export and import of the full configuration for quick roll-out across several rooms
  • Works with RelayAV, KanexPro's control app: Bluetooth volume, mute and pairing, the source, input gain, mute and sensitivity, output volume, mute, delay and level, input and output EQ, and the Bluetooth name and paired phones, from the RelayAV app
Audio Inputs and Outputs
InputsBluetooth audio; unbalanced analog audio (RCA or 3.5mm stereo jack); Dante® digital audio
OutputsUnbalanced analog audio (RCA and 3.5mm stereo jack, simultaneous); Dante® digital audio
Dante® Channels2 transmit (Bluetooth or analog input) + 2 receive (to analog outputs)
Audio Formats
Bluetooth In2 channels; 44.1–48kHz; 16/24-bit
Line InUnbalanced analog, 2 channels, max. input level +18dBu
Dante® In/OutDigital audio, 44.1–96kHz, 16/24-bit
Line OutUnbalanced analog, 2 channels, max. output level +20dBu
Input Sensitivity+18dBu, +4dBu, 0dBu, 0dBV, -10dBV, -18dBV (default +4dBu)
Output Gain+20dBu, +4dBu, 0dBu, 0dBV, -10dBV (default +4dBu)
Audio Performance
Frequency Response20Hz–20kHz
S/N Ratioat least 100dB
THD+Nup to 0.1%
Audio LatencyDante® device latency of 2, 3, 4, 5 or 10ms, set in Dante® Controller
Output Delay0–50ms per channel
EQ8-band PEQ per channel; Parametric, Lowpass, Highpass, Low Shelf, High Shelf; +/-15dB; 20Hz–20kHz; Q 0.02–16
Network and Control
Network Bandwidth100Mbps
Transmission Distance328ft (100m) over CAT6/6A/7
Audio TransportDante®; AES67 RTP
ControlDante® Controller; Web GUI (Admin and User accounts); TCP/IP API (port 8000) and Telnet (port 23); front-panel PAIR button; RelayAV
IP ModeDHCP (default) or static
ESD ProtectionIEC 61000-4-2: +/-8kV (air-gap discharge), +/-4kV (contact discharge)
Connectors
Bluetooth Input1x, internal antenna
Analog Inputs1x 3.5mm stereo jack; 1x RCA stereo pair; line level, unbalanced
Analog Outputs1x 3.5mm stereo jack; 1x RCA stereo pair; line level, unbalanced
Dante® (PoE)1x RJ45 with PoE; link and data LEDs
Service1x USB-C (female), Bluetooth firmware upgrade
Pair1x PAIR button with blue LED
DC 12V1x 2-pin 3.5mm Phoenix connector
Power
PoE InputIEEE 802.3af, Class 0
DC Input12V / 1A
Power Consumption3W (max.)
Power AdapterNot included
Physical
Form FactorUS 2-gang wall plate
HousingPlastic panel, iron chassis
ColorWhite panel, silver chassis
Dimensions (W × D × H)3.94 × 1.77 × 4.21 in (100 × 45 × 107 mm)
Weight0.81 lbs (366 g)
Environmental
Operating Temperature32°F to 104°F (0°C to 40°C)
Storage Temperature-4°F to 140°F (-20°C to 60°C)
Operating Humidity20% to 80% RH, non-condensing
Storage Humidity10% to 90% RH, non-condensing
Compliance
FCCPart 15, Class B digital device
Package Contents
1xBluetooth and Analog Audio to Dante® 2x2 Wall Plate
1x2-pin 3.5mm Phoenix connector (male), for the DC 12V input
Bluetooth and RCA/3.5mm to Dante 2x2 Wall Plate, 2-Gang US, PoE panel drawing
Bluetooth and RCA/3.5mm to Dante 2x2 Wall Plate, 2-Gang US, PoE system diagram
Bluetooth and RCA/3.5mm to Dante 2x2 Wall Plate, 2-Gang US, PoE applications
in the same range
AUD-DTE-WPXLR 2x2 XLR to Dante® Wall Plate, 48V Phantom, US 2-Gang Decora, PoE
Two XLR Inputs onto Dante® and Two Dante® Feeds Back Out, at the Wall
Out of stock
in the same range
AUD-DTE-WPBT Bluetooth to Dante Wall Plate, 1-Gang US, PoE
Two Phones or Laptops onto Your Dante® Network from One Wall Plate
Out of stock
a similar product
AUD-DTE-2X2XLR 2x2 XLR Dante Audio Bridge with DSP, 8-Band PEQ and Delay
Mic-to-Line Analog onto Dante® and Back, Tuned at the Box, from -35dB...
B2B portal only

Buying for resale, a project, or your own site?

Trade accounts see net pricing, stock and one-click reorder from past jobs. Dealers, integrators, businesses, schools and public bodies all qualify. Approval is usually the same working day.