HDMI HDbaseT 矩阵 4X4 CAT6 70M 4K@60Hz

The KanexPro MMX-4X4CAT-70M is an 18Gbps 4×4 HDMI matrix switcher with simultaneous mirrored HDBaseT CAT outputs, delivering 4K60 4:4:4 signal distribution to up to eight displays from four sources in a compact 1U rack-mountable enclosure. Each of the four outputs delivers the signal via both a direct HDMI port and a mirrored HDBaseT CAT port — extending the signal to the included PoC-powered CAT receivers up to 230ft (70m) over a single CAT6 cable. 12V Power over Cable powers the remote receiver through the same cable, removing the need for a separate power supply at each remote display location. Suited for smaller conference rooms, huddle spaces, classrooms, digital signage deployments, and multi-zone residential or hospitality AV installations.

All HDMI and CAT ports support up to 4K2K@60Hz (YUV 4:4:4) with full 18Gbps uncompressed bandwidth, HDR pass-through (HDR10, HDR10+, Dolby Vision, HLG), and HD audio including LPCM 7.1, Dolby TrueHD, Dolby Digital Plus, DTS-HD Master Audio, and DTS-X. An independent 4K-to-1080p downscaler on each output supports mixed-resolution display environments without additional hardware. Advanced EDID management with multiple factory and copy presets, CEC display control, and one-way IR matrix routing are all built in. Control is available via front panel buttons, IR remote, RS-232 serial, TCP/IP LAN, and a browser-based Web GUI — compatible with Crestron, AMX, and other automation platforms.

Package Contents: 1× MMX-4X4CAT-70M Matrix  •  4× CAT Receivers  •  1× IR Remote  •  1× 12V/3A Power Supply  •  1× RS-232 Serial Cable (1.5m)  •  4× IR Blaster Cables (1.5m)  •  5× IR Receiver Cables (1.5m)  •  Mounting Ears (Matrix + Receivers)  •  1× User Manual

• 4x4矩阵切换
• 4 个 HDMI 输入端口，4 个 HDMI 和 4 个 CAT x 镜像输出端口
• 所有 HDMI 和 CAT 端口均支持高达 4K2K@60Hz (YUV 4:4:4) 的视频分辨率
• 通过 CAT x 线缆，信号扩展距离可达 230 英尺/70 米
• 支持单向红外矩阵功能
• HDBT技术
• 智能EDID管理
• HDCP合规性
• 音频去嵌入
• RS-232 和红外直通
• 可通过前面板按钮、红外遥控器、RS-232、LAN 和 Web 图形用户界面进行控制。
• 缩放和输出调整